30 ton or 40 ton hydraulic puller are used for 800KV to 1000 KV transmission line construction in China. 2X70 KN tensioner or 2X80 KN tensioner are also used.

It is suggested to use two puller with four tensioner for reducing the pulling force of pilot wire rope normally. So 30 ton puller is normally used with 2 of 2 X70 tensioner in the engineering operation.

1. SA-YQ420 Hydraulic Puller Machine

Application: The hydraulic puller is used to pull four bundled conductors or 2 bundled conductors for power line construction. It is fully hydraulic controlled, easily used and maintained

Features:

-          Closed hydraulic circuit,infinitely variable speed control in both rotating directions.

-          The max pulling force for stringing operation can be preset, pulling force in the rope can be read on the line pull gauge.

-          Automatic over pulling protection system

-          Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.

-          Hydraulic oil cooling system.

-          Heat treated wear-proof bull wheels

-          With rigid axle for towing at high speed, the machine looks beautiful.

-          Hydraulic actuated pulling rope clamp for convenient reel change.

-          Integral self-loading reel winder with automatic level wind.

-          Max. reel diameter 1900mm

Main Components:

-          Engine: Cummins water-cooled diesel engine. (USA)

-          Main variable displacement hydraulic pump and main motor: Rexroth  (German)

-          Reducer: Rexroth. (Germany)

-          Reel winder motor: Danfoss (Danish)

-          Main hydraulic valves: Rexroth (Germany

-          Hydraulic instruments: WIKA (German)

-          Radiator: AKG (German)

2. Hydraulic Tensioner SA－YZ2X90  for 2 bundled conductors

Application: It is suitable to string two bundled conductors or single conductor in overhead transmission line.

Features:

-          Closed hydraulic circuit, infinitely variable tension force control in both directions.

-          The max. tension/pull back force for conductor stringing operation can be presetted, the tension /pull back force can be read from the tension gauge of machine.

-          Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure line safety

-          Hydraulic oil cooling system

-          Bull wheels lined with wear proof MC nylon lining segments

-          With 2 hydraulic power outlets to control 2 sets of hydraulic reel stands.

-          Hydraulic front jack

-          Mounted on trailer with rigid axle for towing at max. speed of 15 km/h

Main components:

-          Engine: Deutz air-cooled diesel engine (Made in China)

-          Main variable displacement pump and main motor: Rexroth (German)

-          Reducer: R.R. (Italian)

-          Main hydraulic valves: Rexroth (German)

-          Hydraulic Instrument: WIKA

-          Quick couplings: EMB

-          Radiator: AKG

1. SA-YQ300 Hydraulic Puller

Application: The hydraulic puller is used to pull one steel rope for conductors stringing. It is fully hydraulic controlled, easily used and maintained

Features:

-Closed hydraulic circuit,infinitely variable speed control in both rotating directions.

-The max pulling force for stringing operation can be preset, pulling force in the rope can be read on the line pull gauge.

-Automatic over pulling protection system

-Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.

-Hydraulic oil cooling system.

-Heat treated wear-proof bull wheels

-With rigid axle for towing at high speed, the machine looks beautiful.

-Integral self-loading reel winder with automatic level wind.

-Hydraulic front jack

-Mounted on trailer with rigid axle for towing at max. speed of 15 km/h on work site.

Main Components:

-Engine: Cummins water-cooled diesel engine. (USA)

-Main variable displacement hydraulic pump and main motor: Rexroth (German)

-Reducer: R.R. (Italian)

-Reel winder motor: Danfoss (Danish)

-Main hydraulic valves: Rexroth (German)

-Hydraulic instruments: WIKA (German)

-Radiator: AKG (German)

2. Hydraulic Tensioner SA－YZ2X80  for 2 bundled conductors

Application: It is suitable to string two bundled conductors or single conductor in overhead transmission line.

Features:

-          Closed hydraulic circuit, infinitely variable tension force control in both directions.

-          The max. tension/pull back force for conductor stringing operation can be presetted, the tension /pull back force can be read from the tension gauge of machine.

-          Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure line safety

-          Hydraulic oil cooling system

-          Bull wheels lined with wear proof MC nylon lining segments

-          With 2 hydraulic power outlets to control 2 sets of hydraulic reel stands.

-          Hydraulic front jack

-          Mounted on trailer with rigid axle for towing at max. speed of 15 km/h

Main components:

-          Engine: Deutz air-cooled diesel engine (Made in China)

-          Main variable displacement pump and main motor: Rexroth (German)

-          Reducer: R.R. (Italian)

-          Main hydraulic valves: Rexroth (German)

-          Hydraulic Instrument: WIKA

-          Quick couplings: EMB

-          Radiator: AKG

Shipment

1. The machine will be shipped in container

2. We will ship the products within one month normally after receiving the payment.

3. Stock is available for standard product.

Package

1. The machine will be loaded in container and fixed with steel wire rope.

2. The accessory and operation manual will be packed in plywood case.

Payment

1. We accept T/T and L/C.

2. Please send swift copy of T/T if you arrange payment by T/T

3. Please send us the L/C draft to us before issue L/C.

Why choose us:

1. High quality and competitive price

2. Leading and biggest manufacture for stringing equipment in China.

3. 25 years of production experience and more than 1000 customers in the country and abroad market. The set of 30 ton hydraulic puller have been sold to more than 10 customers in China.

4. Big stock condition for fast shipment.

5. Detailed pre-sales service and fast active after-sales service. Response within 12 hours after-sales service